Cleaning your AR is an essential step in maintaining your AR. Follow these procedures to keep your firearm in proper working order.
Cleaning the AR15 - with its chrome lined barrel - is a little different than cleaning a regular sporting rifle. The chrome lining will take longer to break in - usually 100 - 200 rounds, and once properly broken in, will really not require much scrubbing until many thousand rounds later when your target groupings start to suffer. Chrome barrels don't get fouled nearly as quickly as steel barrels, and they won't rust or pit either.
Here is the basic cleaning process - after a shooting session, clean the bore and chamber with a nitro solvent (Hoppe's or equivalent) and run patches through until all solvent is removed. Caution - any solvents that can affect nickel may damage the finish of the receiver unless removed. A Nickel Acetate sealant is applied as one of the receiver's last finishing steps, and some solvents will attack that finish.
The use of a chamber rod guide (available in our catalog) will limit your cleanup. Once the rifle is clean and dry, apply a light oil with Teflon but don't over-do it. We sell the Tetra brand, others are Break-Free and Rem-Oil. The manual that comes with your rifle will show you how and where to oil. After many (thousands) of rounds, if the rifle's accuracy starts to suffer, scrubbing the bore down with a good copper solvent, plenty of elbow grease, and patience, will produce a barrel that shoots as good as new.