Help Center

Contact Support

What does it take to install a bipod stud?

Table of contents


We install the bipod stud by drilling and tapping the aluminum handguard for it.

  • Locate the position you want the stud, usually half way between the end and the knurling, then use a prick punch to mark it so the drill will not walk.
  • A top dead center punch works best with the receiver upside-down and receiver leveled.
  • Use a # 21 drill bit for the hole.
  • Then tap the hole with a 10-32 tap.
  • Install the stud with a drop of # 271 Loctite on the threads.
You must to post a comment.