Help Center

Contact Support

How do I remove the rail covers on the Bushmaster Modular Carbine?

Table of contents
No headers

In order to remove the rail covers on the quad rail handguard, you want to make sure that the tabs underneath line up with the matching slots in the rail. Slide one side under the edge of the rail and apply pressure with the heel of your hand to hold the lower edge in place while pulling up the other side with your fingers to open it up starting at one end until you can press the top side onto the rail then working it on like that every 1/2" to 3/4" until you get to the other end. Start at one corner to pull back the cover working it off to the other end to remove it.

You must to post a comment.